Repair of the SUA 125 machine which was flooded

In March 2025, we handed over the SUA 125 lathe after repair.

Horizontal boring machine WH10 CNC

In November 2024, we put the WH 10 CNC horizontal boring machine into operation.

JUS SUI 63 CNC single purpose machine

In November 2023, we completed and successfully handed over to our customer a single-purpose JUS SUI 63 CNC machine for the production of propeller blades.

WH 10 CNC machine with 2500 rpm headstock

In July 2023, we successfully completed and commissioned the WH 10 CNC horizontal boring machine.

Overhaul of the SKIQ16 CNC CAROUSEL

In February 2023, the SKIQ 16 CNC carousel was handed over to our important customer after an overhaul.

The machine used a unique covering of the working space of the machine with a semi-circular motorized door.

General repair of the SKIQ 16 CNC carousel lathe

In December 2021, we put the SKIQ 16 CNC carousel into operation after a general overhaul.

MODERNIZATION OF THE SEDIN 1516 CAROUSEL LATHE

In July 2021, we put the modernized carrousel SEDIN 1516 into operation.

Horizontal boring machine WHN 9

At the end of 2019 we completed and successfully put into operation a horizontal boring machine WHN 9.

The machine is equipped with NC control with 5-axis and Siemens SIMATIC programmable controller.

Horizontal boring machine WHN 13.8 CNC

In September 2019 we delivered to our customer a horizontal boring machine WHN 13.8 CNC.

The machine is a 5-motor version and is controlled by the HEIDENHAIN TNC 640 control system.

Horizontal boring machine WH 10 CNC

We handed over to our customer a horizontal boring machine WH 10 CNC with Heidenhain TNC 640 control system.

The machine is made in 5-engine version.

Horizontal boring machine WHN 13.8 CNC

In October 2018 we successfully completed a horizontal boring machine WHN 13.8 CNC with Heidenhain TNC 640 system.

Travel in X-axis = 3.500 mm.

Horizontal boring machine WFD 130

We have successfully handed over our WFD 130 horizontal boring machine with a cross feed of 8000mm

Horizontal boring machine WFQ80 CNC

Completion and handover of horizontal boring machine WFQ 80 CNC with Heidenhain TNC 620 system. The machine is controlled in 4 axes.

Vertical lathe SKIQ 16 CNC

For a major customer, we implemented a complete overhaul of the TOS SKIQ 16 CNC vertical lathe with automatic tool change and Siemens Sinumerik 840 D sl.

Moving of machine tools from Germany

Moving of the technological unit of 25 pcs of machine tools for an important international company, including the setting up and involvement of machines in the production hall in the Czech Republic.

Overhaul of the electric part of the DXWK 630 CNC lathe

Implementation of overhaul of the electric part of the German lathe DXWK 630 with dimensions 9550x2200x1520 mm intended for the production of cylinders.

The control system Siemens Sinumerik 840 D sl.

Overhaul and modernization of 2 pcs DÖRRIES SD 125 CNC vertical lathes

Overhaul and modernization of 2 DÖRRIES SD 125 CNC vertical lathes

Electrical installation of SCHULER 360 press

We have implemented a new electrical installation SCHULER 360 for our customer.

The press is equipped with control unit Siemens SIMATIC programmable controller and is equipped with all safety elements according to valid standards.

Horizontal boring machine WHN 13.4C

We handed over to our customer the horizontal boring machine WHN 13.4C made by TOS Varnsdorf after a complete overhaul.

Double column vertical lathe SKD 32A

In April 2016, after complete overhaul, we put into operation a two-column carousel SKD 32A produced by ČKD Blansko.

Vertical lathe Dörries VCE 1400/100 D

In October 2015, was successfully handed a vertical lathe Dörries VCE 1400/100 D to a customer after a overhaul.

The machine has two independent work tables.

The vertical lathe is equipped with the SINUMERIK 840 D sl control system.

Horizontal boring machine WH 10 CNC with control system SINUMERIK 840 D sl

For our customer we have carried out a overhaul and modernization of horizontal boring machine WHN 10 CNC with control system SINUMERIK 840 D sl and electric drives SINAMICS.

Horizontal boring machine WH 10 CNC

In November 2014 we completed and handed over the horizontal boring machine WHN 10 CNC.

The machine is a 5-motor version with HEIDENHAIN TNC 620 control system.

Horizontal boring machine WH 10 NC

In October 2014 we successfully handed over the horizontal boring machine WH 10 NC.

Depending on the customer's requirements, the machine is designed in a single-motor version with the HEIDENHAIN TNC 128 control system.

Double column vertical lathe SK 16

In March 2014, we successfully completed and put into operation the carousel SK 16 after the GO.

The machine is equipped with digital position measuring in X1, Z1 and X2, Z2 axes.

Lathe MASTURN 70 CNC

In October 2013 we handed over to our customer the lathe MASTURN 70 CNC after the overhaul.

Vertical lathe TOS SKIQ 12 CNC, SKI 16 CNC a SKJ 10 CNC

At the end of 2012, we successfully handed over the vertical lathes TOS SKIQ 12 CNC, SKI 16 CNC and SKJ 10 CNC to a major Czech company after the overhaul.

Machines are equipped with control system SINUMERIK 840 D.